Shoulder Screw (Cover Plate) Medium
The Medium Shoulder Screw is used to fasten the gripper Cover Plates to the bridges of the hydraulic rams. It requires a 5/32” (or 4mm) hex key, and should be installed with anti-seize. This shoulder screw is used in addition to the flat screw (TT-FSNR-BA750F) because it also acts as an anchor point for the Tension O-rings that return the Gripper Assembly to their lower position.
- 1/4-20 TPI
- 5/16” dia. x 0.5” long shoulder
- 7/16” thread length
- 15/16” overall length
- fastener rating equivalent to or greater than grade 8
- torque to no more than 5 ft-lb