Thin Nut for Towerless Gripper assemblies
Thin Nut for Towerless Gripper Assembly
$3.00
The Thin Nut for Towerless Grippers is used to retain the Shoulder Screw (Towerless Grippers) in the Yoke Arm Pair, and to provide clearance for the Yoke Arms to articulate without interference from the Monolithic Grippers. It requires a 7/16” wrench, and should be installed with anti-seize.
- 1/4-28 TPI
- 5/32” tall
- fastener rating equivalent to or greater than grade 8
- thread the nut onto the bolt until it is snug against the shoulder before installing them on the puller
