2 Inch Threaded Stud for 1 1/8" Cable

The 1-1/8” Threaded Stud is a swage-on stud with a 2 – 4.5 UNC thread pitch. It allows the 6″ or 8” head assembly to be threaded on to the cable, and to be pulled by the M100. The 1-1/8” Stud and Cable will let you pull most of the 8”+ pipe-bursting jobs, but it is ultimately dependent on soil conditions. Each threaded stud comes with a Pulling Eye (TT-CABL-TSPE) for pulling the cable through the pipe, and that part number can be used for purchasing spare or replacement ones. The 1-1/4” cable only allows for a little bit over 5 tons of additional pulling force. Please feel free to call in if you have any questions, comments, or concerns.