3/4" to 1" Galvanized Pipe Pusher

The TRIC Galvanized Pipe Pusher is designed for 3/4” and 1” galvanized steel lines. Steel service lines need to be straight and relatively short
(20–25 feet) or done in stages. A 60-foot line, for example, should be pot-holed every 20 feet and have a small 3” to 4” section cut
out before stringing cable through. This is because the pulling cable (TTA-CA38-80PTI) has a test strength of only 8–10 tons, and overcoming friction on
longer sections of pipe will likely result in breaking the cable. The cable is pulled with 3/8 Gripper Assemblies (TTA-GA-38ASM). The Galvanized Pipe Pusher user guide is available under the ‘Documents’ tab.